Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Mazda MX-5 Miata S-V.4 Led H7 Bulb Adapter
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
ABS or ASA for high temperature resistance
Saved part guidance
Strength start
Increased perimeters for a solid part, 100% infill recommended
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This Thing is an adaptor that will allow installation of Headlight Revolution's S-V.4 H7 LED headlights in a Mazda MX-5 Miata. The installation requires an adapter but Headlight Revolution does not sell the adaptor. These bulbs are very bright and work well in the Mazda projector housings. Print the adapters in ABS or other high temperature material. I printed with increased number of perimeters for a solid plastic part. Video with backstory, light output and beam shots: https://www.youtube.com/watch?v=-eODmIstvgE&t=48s Video with adapter and installation details: https://www.youtube.com/watch?v=TfxACr6kos8
Compatible Cars
Originally published on thingiverse.com by chuck cantieny (cbc) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
7" Headlight Cover
Mazda MX5 - Fiat 500 side repeater bezel
MX-5 Reg Plate Light Panel
Spacer for MX-5 aftermarket side indicator repeaters. (Mk3 - NC)
Miata NA Brake Light Mod adapter
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
