Mazda MX5 - Fiat 500 side repeater bezel

0 downloads67 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability in outdoor conditions

Saved part guidance

Strength start

20-50% infill for strength and minimal weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Designed to allow installation of Fiat 500 side indicator repeater units. Fits NA, NB, NC. May also fit other cars as long as the studs on the indicator unit will fit through the original side repeater hole and the bezel is large enough to cover any holes in the wing. I suggest printing the rear holder as a solid in ABS. In an ideal world I would turn the outer bezel from aluminium or stainless steel but a solid 3D print would work too. You will need to unbolt the arch liner to access behind for the nuts. Install with the dimples on the rear holder facing towards the bezel. They have been designed to apply the clamping load over a small surface area to reduce the chance of slippage. If you like this please use the "Tip the designer" button just over there ---> somewhere. Many thanks Nick - Skuzzle.