Mazda Mx5 Mk1 Mk2 Wiper cap cover

0 downloads53 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill, 1.2-1.6mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This can be a replacement for a missing wiper cap cover on the Mazda Mx5 Mk1 or Mk2. Made using measurements from the original to match as close as possible. This is a snug fit so you might need to gently tap it in. This can be a replacement for a missing wiper cap cover on the Mazda Mx5 Mk1 or Mk2. Made using measurements from the original to match as close as possible. Printed in PLA. Use support and print with the same orientation as the pic (or rotate 90 degrees so the flat side is on the bed).