Files (3)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Miata Gauge Panel V3 + V4 - Turbo Boost & AFR Gauge Mount
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
3 hosted model files
STL
Material start
ABS
Publisher-saved recommendation
Strength start
25% infill
Publisher-saved setting
Orientation / supports
Likely not needed
Exact totals
85 g · 4.5 hours
Saved estimate
Vehicle exposure
Engine-bay exposure — use rated material or OEM
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
Michael ChenDescription
Right now I am in the process of turboing my 1996 Mazda Miata and I couldn't seem to find a good way to mount the boost gauge and AFR gauge. I removed the little cubby under the radio and made this to fit in there! Hope someone else can get some use of this - I know I will!
I used Brass #8 x 3/4 in. Wood Screws to hold mine in and it worked great!
Bill of Materials
Hardware, filament, and supplies to check before printing this part.
ABS filament
Qty 85 g estimate
Match diameter and temperature range to your printer before ordering.
Buy / sourceSome purchase links may become affiliate links. Confirm dimensions, fitment, material limits, and safety before buying or installing anything in a vehicle.
Compatible Cars
Originally published on thingiverse.com by Daversity · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
