Files (1)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
MX5 NA Custom Radio Frame and Duckett
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This design is still a work in progress... Custom Radio Frame and Duckett for NA Mazda Miata / MX-5. With only ever using the Bluetooth feature on the aftermarket headunit fitted to my MX5 NA, I decided to design my own "hidden" headunit. Main goals where: - instant bluetooth connectivity with my phone - volume up/down and skip track functionality - clean / minimalist look - high amperage / fast charge usb socket - large duckett / storage area to store mobile phone / wallet / etc - provision an analogue clock (still work in progress) Shout out to "undrwd", it was their Radio Blank Plate I used as a starting point for this design. https://www.thingiverse.com/thing:3369273 To make it quicker and easier to print, I split the model into several parts and then glued them all together. The design bolts to the back side of the dash tombstone with 6 off Pozi Flanged Self Tapping Srews that I had left over from another project. As they were too long, I printed some spacers. If there is enough interest, I might post the wiring diagrams (was a total nightmare as the wire colours in my car didn't match anything I found online, apparently an issue with some earlier JDM spec cars) Currently printed in PLA as will be reprinting soon to include the Clock and capture any other design improvements. (The Sun is not hot enough in Scotland to melt PLA haha). The Eunos badge is a remix of Omdoyas design, you can find the details here. https://www.thingiverse.com/thing:5389972 The Bluetooth reciever: PowerBass XL-50BT The Amplifier: Kenwood KAC-M1814 (mounted it to the back of the glovebox).
Compatible Vehicles
Originally published on thingiverse.com by Tim Taylor (timmyisasleep) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
