Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Power_Steering_Pump_Controle_Plug_With_Remover_Edge.stl | Primary model | 22.0 KB STL | 8g $0.20 | 9g $0.22 | 20g $0.48 | Small functional file: print slowly; consider 80–100% infill for durability. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Mini Cooper Powersteering Pump Control Plug
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
This connector plug fits the control port on a electric power steering pump to 02-08 Mini Cooper's. The units have 3 control pins and a main 12v power plug. To start the pump, pin-1 needs to be connected to 12v+, and then pin-2 needs only be temporary pulsed once on 12v+ for a second or two. In other words pin-1 should be connected to your ignition switch and pin-2 connected to your distributor so that the pump only starts once the engine is running. This pump makes for a good custom electric power steering conversion in hot rod applications. If you need the main power connector there's one here --> https://www.thingiverse.com/thing:4668634
Compatible Cars
Originally published on thingiverse.com by David Carlson (DaveThing2016) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
