Files (2)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Cap_And_Pin_MK7_Transit_Sliding_door_end_cap.stl | Cover / cap | 52.4 KB STL | 10g $0.25 | 11g $0.27 | 24g $0.59 | Use PETG / ASA; check sealing faces and verify in slicer. |
| pin.stl | Printable file | 30.9 KB STL | 9g $0.22 | 10g $0.24 | 22g $0.52 | Use a raft to prevent the pin from falling over during printing |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
MK7 Transit Sliding Door Rail End Cap
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
This is a replacement for the MK7 Ford Transit Sliding Door Rail End Cap. The pin is a snug fit but with a push it will interlock between the cap and the rail and not vibrate out. I printed this in PLA with no issues (Use a raft as it stops the pin falling over). Also I have included a separate upload for just the pin, in case it breaks on install and you only want to print the pin again. Thanks.
Compatible Cars
Originally published on thingiverse.com by Aarron Sharp (Aarronsharp) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
