MR2 Spyder headlight replacement tab

0 downloads55 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

ABS or ASA

Saved part guidance

Strength start

high infill for strength, consider 100% or thick walls

Saved part guidance

Orientation / supports

supports unlikely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement part for a broken top tab on MR2 Spyder facelift (03+) headlights. For pre-facelift headlights, Toyota sells a replacement tab. ###Instructions - Print with 100% infill and without supports. You should print in ABS or Nylon. The temperatures inside the care are to high for PLA. This is for the right headlight, invert for the left one. - Remove the included support from inside the screw cylinder. - Trim the remaining parts of the broken tab. - Screw the replacement tab using two 11mm long and 4 mm wide screws for plastic (see picture). Edit: I have improved the designed for more strength.