Nissan 240sx Firewall Brake line clamps

Files (4)

Nissan_4_Line_Bottom_clamp.stl

STL

343.3 KB

Nissan_3_Line_Bottom_clamp.stl

STL

382.3 KB

Nissan_3_Line_Top_clamp.stl

STL

1.1 MB

Nissan_4_line_Top_clamp.stl

STL

600.4 KB

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

0 downloads356 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

broke the factory clips off the brake lines on my 240sx so designed these to hold the clamps in using a standard M6 bolt and rivnut on the firewall. made both the 4 Line clamp( closer to brake booster) and 3 Line clamp (other side of the engine on firewall) recommended to print in abs to withstand engine bay temps.