← Back to Browse Parts
Showing 6 of up to 60
Files (1)
boot_clip_pin2.stl
STL
157.8 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
19g
Based on 40% main infill across listed model files
Material cost
$0.46
Filament only at roughly $24/kg ABS / ASA
Print time
32m–54m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | ABS / ASA 20% | ABS / ASA 40% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| boot_clip_pin2.stl | Clip | 157.8 KB STL | 14g $0.34 | 19g $0.46 | 34g $0.81 | Use a strong material to ensure the clip can withstand trunk conditions |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Trunk/Tailgate
Nissan 350z Boot Clip Centre Pin
0 downloads39 views0 likes
Description
Recommended to print with high fill and thin layers in ABS or other strong material. The very top bit requires support.
Compatible Cars
Updated Jul 17, 2026
Originally published on thingiverse.com by (RScullion) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
