Files (1)

NLMM_V1.stl

STL

71.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
NLMM_V1.stl	Primary model	71.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Nissan Leaf: Monitor mount

0 downloads120 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill with 1.2-1.6 mm walls

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Do you have a Nissan Leaf and wish you had the around view monitor like the Tekna does? Well you’re in luck, as I have developed precisely fitting mounts to fit a standard car reversing camera to the mirrors on either side of the Leaf and the front, giving you a great view of the curb and other obstacles, see the photos! This thing is the mount for the monitor, to allow all this to be viewable by the driver.All this without permanently modifying the car at all, so great for if you’re leasing the Leaf. If you don't have a 3D printer but would like one, please leave a comment:).