Pico Squeeze 2 Mod for BMW Cup Holder - image

Files (1)

Shiny_Hillar.stl

STL

504.5 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Cup Holders

Pico Squeeze 2 Mod for BMW Cup Holder

0 downloads71 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG or ASA for durability in a car environment

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer, but printing headover may eliminate the need for supports

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Das ist mein selbstentwickelter Mod für die jenigen wenigen, die den Eleaf Pico Squeeze 2 nutzen und zufällig auch noch einen E46/E39 fahren. ich habe für den originalen Getränkehalter einen Adapter gebastelt, um die Dampfe dort hineinstellen zu können, ohen dass diese umfällt. Eventuell passt er auch in andere Fahrzeuge, das kann ich aber nicht bestätigen. Der untere Durchmesser beträgt 72mm, der obere 84mm. Wichtig ist, dass ihr das Modell auf dem Kopf stehend druckt, wenn ihr keinen Support drucken wollt. __________ This is my self designed Mod for all Vapers with an E39 or E46 BMW and the Eleaf Pico Squeeze 2 Mod. I have designed an adapter for the original cup holder, to put the Vape in it, without falling over. Maybe this is fitting into other cars, but this isn't tested. The Diameter in the bottom is 72mm and the diameter in the top 84mm. Its important to print it headover when you dont want to print with support.