Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Porsche Cayenne 2003 rear wiper cover
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
ASA or ABS for durability in outdoor conditions
Saved part guidance
Strength start
20-30% infill for a balance between strength and weight
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Rear windscreen wiper cover for Porsche Cayenne 955 2003. After the windscreen wiper cover got knocked off some how I purchased one from Porsche spare parts. I had to buy both the cover and the rear window handle/lock switch too, NZ$100 ish In another country I could get one on Ebay for $10 I broke the little plastic catch inside trying to put it on. Had to buy a second one.. Got a panel beater to put it on the car. 2 years later that too fell off and I ran over it on the driveway. So I thought i would design one. I had the new unused base to keep trying the fit. I made about 10 that were wrong. But thats whats so good about having a 3d printer for prototyping. Kind of a replacement for planning. First one I have made is in PLA and I will make another in ABS as black can get pretty hot and it will fail. Happy to share.
Compatible Cars
Originally published on thingiverse.com by Tom Doo (Yosemite) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Porsche Speedster side badge
Porsche
porsche emblem
Porsche
Corvette Silhouettes
Porsche
Porsche 981 wind buffet diffuser
Porsche
Audiofrog GB Series Adapters - Porsche Macan
Porsche
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
