Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016 - image

Files (4)

Mazda_3_Bumper_Cover_Passenger.step

STEP

43.6 KB

Mazda_3_Bumper_Cover_Passenger.stl

STL

34.2 KB

Mazda_3_Bumper_Cover_TEXT.step

STEP

531.1 KB

Mazda_3_Bumper_Cover_TEXT.stl

STL

147.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Mazda_3_Bumper_Cover_Passenger.step	Cover / cap	43.6 KB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mazda_3_Bumper_Cover_Passenger.stl	Cover / cap	34.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mazda_3_Bumper_Cover_TEXT.step	Cover / cap	531.1 KB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Mazda_3_Bumper_Cover_TEXT.stl	Cover / cap	147.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Rear Bumper

Rear Bumper Tow Towing Hook Cover Eye Caps Fit for Mazda 3 2014-2016

0 downloads76 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

4 hosted model files

STL + STEP

Material

PETG or ASA for durability in outdoor conditions

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between strength and weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.