Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Renault Zoe Rear seat clip 883041628R
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill with 2-3 walls for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Engine-bay exposure — use rated material or OEM
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I found that if I removed the rear seat completely and wound the frond seat right back I can get a ladder in the Zoe, which is handy. However after removing the seat base I found the clips holding it down broke (Stupid Renault!) then was rather miffed to find the replacement cost from Renault were so much. This is a remake as the original version by ermdem03 as it didn't have the required catch inside to hold the seat down. I have also made it a bit simpler and it is now manifold so should print without issue. Printed at 0.2mm with 2 shells and 20% infill. It should now fit easily and be reusable at least few times, so in my mind is better than the original Renault item and has saved £21:-O.
Compatible Cars
Originally published on thingiverse.com by Zarni (Zarni) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Renault Zoe Anti SD Eject Cap
Wireless charging pad for Renault Zoe MY 21.5
Renault ZOE rear interior courtesy light fixture
Renault Zoe R90 2017 Cable Hook
Renault Zoe rear seatbelt clip magnet
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
