Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Dashboard

SQ8 camera mount with GoPro adapter

0 downloads88 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

English. The original idea is to have a comfortable stand to place the SQ8 camera on the dashboard of a car. The design is made so that it is possible to have the power cable connected when the camera is placed in the holder. In order for the camera to hold properly, it is necessary to glue a few pieces of foamy in the camera housing. The foamy must be 2 mm thick for the camera to hold properly. The two pieces can be glued with cyanoacrylate glue so that they are securely fastened together. Español. La idea original es la de disponer de un soporte cómodo para colocar la cámara SQ8 en el salpicadero de un coche. El diseño está realizado para que sea posible tener conectado el cable de alimentación cuando la cámara está colocada en el soporte. Para que la cámara se sujete correctamente, es necesario pegar unos trozos de goma eva en el alojamiento de la cámara. La goma eva debe tener 2 mm de espesor para que la cámara se sujete correctamente. Las dos piezas se pueden pegar con pegamento de cianoacrilato (SuperGlue, Super Ceys o similar) para que queden bien sujetas entre sí.

Compatible Vehicles

Audi SQ8

Published Jun 28, 2026Updated Aug 12, 2026

Originally published on thingiverse.com by Fernando Bueno (fbuenonet) · License: CC BY

Browse categories

Browse other part families

Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.