Star Wars Imperial Cog Blinker and Fog Light Grilles for Jeep Wrangler - image

Files (2)

Jeep_JK_Foglight_Grille.stl

STL

1.5 MB

Jeep_JK_Turn_Signal_Grille.stl

STL

1.5 MB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Exterior

Star Wars Imperial Cog Blinker and Fog Light Grilles for Jeep Wrangler

1 downloads265 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA for durability in outdoor conditions

Saved part guidance

Strength start

20-30% infill for a balance between weight and strength

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

UV/weather exposure — ASA is the starting point

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. I took the basic size from Summer Ride's Flasher Grille. I replaced the grille with the Imperial cog symbol and played with the flanges a bit. It is open enough that you can still see most of the light from the blinker (see picture). The fog light grill needed tweaking with the size. I also rotated the flanges 180 degrees. Now they fit perfectly. I tried black and thought it would look great with the white Jeep body. However, as can be seen in the pictures, the black didn't stand out like I thought. The white does show better, but that's my opinion. Also, my foglight have halo lights. The halos show perfectly just inside the outside ring of the grille. It looks great actually (picture). The differences between the blinker and fog light files are: The fog light file has a slightly smaller diameter, like 1.5 mm or so.