Files (7)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Star Wars Spare Tire Hub Cap for Jeep Wrangler
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I designed this for my 2015 Jeep Wrangler Sahara Unlimited. I know they will fit other models and years, but I don't know which. I wasn't paying attention that the original was for a Jeep Liberty. I added the Imperial Cog and printed it. The whole thing slipped right through the hole on my spare for my Wrangler. Oops. I resized it for the Wrangler. To get the two toned look, you have to change the filament at the correct height. I printed it with the smaller section on the build plate and used supports (right side up). I changed the filament greater than 9.3 mm, once it starts the walls and infill for the raised parts of the cog. It could be printed with the cog down (upside down). The raised section is 2.5 mm. The filament MUST be changed at 2.3 mm, before it starts the roof which will be the other color. If you wait past that and it starts the roof, you won't get the two color look when looking at it from the front. I printed it the other way because if you miss the change by a little, you can't really see that the bottom of the walls are the "wrong" color. Color Change Heights A. Imperial Cog Right side up >9.3 mm Upside down 11.8 mm Upside down 8.7 mm Upside down < 3.1 mm There is also a blank hub center if you want to add your own design.
Compatible Vehicles
Originally published on thingiverse.com by Matt Granger (mgranger114) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
