Subaru Crosstrek XV Tweeter upgrade bracket - image

Files (1)

tweeter_mount_final_2.stl

STL

266.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tweeter_mount_final_2.stl	Mount / bracket	266.0 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru Crosstrek XV Tweeter upgrade bracket

0 downloads52 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA for durability

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for a balance between weight and strength

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Quick adapter I modeled to allow you to mount Dayton Audio 5/8" tweeters into the stock location on the Subaru Crosstrek XV. This should work in models made in the years 2012-2017, I do not have access to a 2018 model to test to confirm fitment. See the full parts list and walk through by Coletrain here http://www.subaruxvforum.com/forum/interior-audio/11002-20-tweeter-upgrade.html The tweeter is a friction fit but I used some non acidic silicon to secure it but hot glue would do the same job.