Tacoma 2nd gen blank switch (center console)

0 downloads65 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

20% infill with 4 walls for stability

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Blank switch inserts for the center console of a 2nd gen Toyota Tacoma (2005-2015) I designed this for my under-seat subwoofer install to have a clean bass volume adjustment knob. I have included STEP files to make it easier for you to customize your own. the one labeled v3 is the one I designed for my custom bass knob. The one labeled v1 is basically the bare minimum of structure to have it not wiggle around, if you have a large switch to install, I recommend starting with that one. Printed with ESUN PETG at 245 and 80 degrees on a G10/garolite print surface 20% infill 4 walls, floors, ceilings. I do not recommend PLA for vehicle mods.