Tacoma Bed Fishing Rod Holder Plates

0 downloads69 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for outdoor durability

Saved part guidance

Strength start

50-70% infill for strength and weight balance

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

These plates are for a fishing rod holder project I did. I origionally cut the plates out of plywood but that obviously didnt hold up to the elements so I tossed these together pretty quickly. I printed these solid 90% infill at 0.2 step rate on slow setting with a DaVinci AIO 1.0 The nut cutout fits a 1/4-20 thread stainless steel nut perfectly snug with a little sanding/dremel.