Tesla Model 3 Center Console Tray & Card Wallets - image

Files (10)

Center_Console.stl

STL

109.1 KB

Center_Console_Wallet_Slots.stl

STL

109.1 KB

Center_Console_with_Wallet_Slots.stl

STL

109.1 KB

Modified_Wallet_Club.stl

STL

104.3 KB

Modified_Wallet_Misc.stl

STL

107.2 KB

Modified_Wallet_Punch.stl

STL

103.0 KB

Modified_Wallet_Transpo.stl

STL

142.5 KB

Wallet_Cap.stl

STL

135.5 KB

Wallet_Case_Slim.stl

STL

52.9 KB

Wallet_Lever.stl

STL

2.9 MB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

10 model files

Material plan

PETG / ABS

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Center Console

Tesla Model 3 Center Console Tray & Card Wallets

0 downloads64 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

10 hosted model files

STL

Material start

PETG or ABS for the bin and PLA for the wallets

Saved part guidance

Strength start

20-30% infill for the bin and 10-20% for the wallets

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Low-heat or decorative use only

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This container goes into the center console of the Tesla Model 3, behind the mobile phone storage and in front of the cup holders. I typically have a bunch of disorganized frequent customer/club cards, punch cards, EV charging cards, metro cards in various business card or card cases in my car. This combines Petland Design's Slim Wallet with jonco223's Tesla Model 3 Center Console Bin. I recommend printing at least the bin in ABS or some heat resistant material. The Tesla Model 3 does have cabin overheat protection, keeping the temp at 104°F or lower, but as that zaps a lot of juice, I'll probably turn it off or turn it to fan only, so expect it to get hot enough to deform PLA. I printed the wallets in PLA, as the mechanisms are more sensitive to shrinkage. Hopefully, they'll be fine in the console. Wallet Case Slim is a default wallet case, while the other Wallet Case files have text written on the side for my own use. Use a small piece of 1.75mm filament for the hinge pin. A dab of superglue on the end will keep it in place.