Files (2)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Choose the needed variant, then slice it for grams, cost, and print time.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Tesla Model 3 Footwell Vent Adjuster
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
2 hosted model files
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
High cabin heat — validate PETG or choose ASA/ABS
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Small adjustable sliding footwell vent to allow you to fully shut off (or fully open) the air vent in the Tesla Model 3 Footwell. Helps prevent you getting freezing feet when the AC is working hard but your feet are just fine! I simply ty-wrapped it to the footwell vent grill to hold it firmly in place, this way its fully removeable with no sticky tape. Not a perfect design, known areas for improvement, so feel free to enhance away!
Compatible Cars
Originally published on thingiverse.com by Mark Mckenzie (msquared100) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 Vent Cover
Tesla Model 3 Febreeze Vent Clip
Diptyque Car Diffuser
2005 Mercedes C240 Vent Tablet Mount
Golf IV (mk4) 52mm boost gauge vent mount
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
