Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Tesla Model 3 Raspberry Pi Holder
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill with 1.2-1.6 mm walls
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
I started using a Raspberry Pi as a dashcam and music storage device in my Tesla Model 3. (Shoutout to Marcone for managing this github https://github.com/marcone/teslausb) But I was unhappy with the case holding the Pi just floating around the center console of the car. So I decided to make a holder for it. This holder is mounted to the front of the compartment by the usb plugs. No screws needed. double sided tape could be used if desired. This version includes some wire management struts in case your wires are too long. I designed this to work with a Raspberry Pi Zero W mounted in Vilros case. But there is room built-in for several different case designs up to 22mm tall x 83mm wide x 37mm across.
Compatible Cars
Originally published on thingiverse.com by Sam Heiser (wowiejr) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Tesla Model 3 / Model Y Console Key Card Holder
Tesla Model 3 Center Console Plastic Bag Hook
Tesla Model 3 Center Console Tray
Supportless 2021 2022 Tesla Model 3 Y Rear Center Console Arm Rest Tray By Printer2261
Switch Box for Adafruit Audio FX Sound Board
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
