Tesla Model 3 Trunk 12v Panel Enclosure

0 downloads45 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG

Saved part guidance

Strength start

20-30% infill with 2-3 walls for durability

Saved part guidance

Orientation / supports

supports likely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-SA

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Enclosure for a Blue Sea Systems Panel 4363 designed to mount to existing holes in the roof of the Tesla Model 3 trunk. I recommend printing this in PETG to avoid issues with heat warping as the trunk of a car can get quite hot. Print with the side with the single small rectangle down on the plate (large opening straight up), and then use supports everywhere to ensure that the mounting slots remain intact. For more info on the full installation, check out this post: https://teslamotorsclub.com/tmc/threads/added-12v-outlet-in-the-trunk.272997/