Files (3)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Tesla Model S Parcel Shelf Lifter
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a rear parcel shelf lifter for the Tesla Model S. Inspired by the now removed https://www.thingiverse.com/thing:3721952 and incorporating the clip from https://www.thingiverse.com/thing:4285139 this auto lifts the rear parcel shelf in the Model S when the liftgate opens. It has a quick release clip which allows the shelf to be removed easily. Recommend one each side, but it seems to work with just one. Best printed in PETG or ABS to withstand summer heat. The red print is PLA for my testing, this was printed at 20% infill, no supports, no raft and works well. The only problem likely being durability in the summer. My final print was meant to be PETG in black, but this proved much harder. I'm not very experienced with non-PLA prints, so this took a lot of experimentation and fails. PETG is also more brittle... My final good results for the PETG prints were - - The window mount on its side, no supports 100% infill. - The top clip on its base, supports, 100% infill - The shelf lifter on its back, no supports, 50% infill
Compatible Vehicles
Originally published on thingiverse.com by Nic Barnes (CommanderB) · License: CC BY
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
