Touring 3rd brake light for E30 BMW vehicles
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
Source link only
No hosted model files
Material start
ABS or ASA for heat resistance
Saved part guidance
Strength start
20-30% infill for durability and weight reduction
Saved part guidance
Orientation / supports
supports unlikely
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
UV/weather exposure — ASA is the starting point
Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Update: Added a wider, shorter version. *currently redesigning the clips because they push the trim piece up and misalign the light.* This is a 3rd brake light housing for an E30 BMW Touring. Small one fits an approx. 82mm wide prototype board chopped down in height and large one fits a 180mm wide board with one end shortened (about 176mm). Work in progress. Tabs printed separately and glued on, so no supports. I suggest ABS for heat in vehicle and ease of solvent glue.
Compatible Cars
Originally published on thingiverse.com by Finger Chili (FingerChili) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
