Trunk Retainer (2005-09 Ford Mustang)
License & use
Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Replacement for the trunk retainer hardware in a 2005-2009 Ford Mustang. This screws onto a tail-light bolt to hold the trunk trim in place. The OEM retainer (see 2nd picture) is expensive and breaks often. Just modeled, printed, and installed this in my trunk, so we'll see how it holds up. The hole is 7/32" (5.56 mm) and the bolt it screws on to is 6mm. I have aftermarket tail-lights so you may need a larger / smaller hole (use a drill or scale the model slightly). I installed two of these: one was tapped and one wasn't. Both worked fine. Tighten using a 15mm socket wrench.
Compatible Vehicles
Originally published on thingiverse.com by Sam Keys (samk3ys) · License: CC BY-NC
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
