VW Polo MK6 >2017 AW Armrest Height Adjuster

0 downloads88 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA

Saved part guidance

Strength start

30% infill

Saved part guidance

Orientation / supports

supports unlikely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC-ND

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is armrest height adjuster wedge designed for vw polo mk6 armrest. After i purchased my new polo i can not grab the shift knob while resting my arm and i designed this. I saw something like this on a website about 15 euros and it was very bad design. Have fun while using this thing. This thing has its own bending point for snaping it on. And it is very strong even for 5mm design(it is 25mm). I prefer PETG filament for heat resistance but i thing it should be just fine with PLA. And I prefer %30 infill. It is one piece by the way. Place this with the right way. I thing you can figure it out. I painted my armrest adjuster after printing for better surface quality with acrilic paint and i used 500 grid sandpaper after paint dried. After all i sprayed varnish for better quality. However you can use it after taking it out from the bed. I will add photos of mine later.