Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
2015-2021 DODGE CHALLENGER COLD AIR HEADLIGHT INTAKE RING TUBE WITH GRILLS
Need this part printed?
Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.
Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.
Description
$60 to $100 for velocity stacks. No thanks. These will fit all Challenger models from the SXT, RT, SRT, Hellcat, to Demon as long as they don't have the light tubes installed. On some models, you'll need to reach in behind the headlight and push in the 3 clips then push out the original headlight plug. I've been running mine in cold and hot weather for about a month now and no problems at all. Print in PLA, PETG, whatever you want, whatever color you want. Used a 60mm x 1.5mm o-ring to secure them in the headlight tube. You can get those cheap on Amazon. You can even use some rubber bands but those will eventually rot. No supports needed and I've includes 3 grill types. The grills insert from the front of the tube at an angle and fit into a ring printed into the tube. It's a tight fit but they will go in. Once in your not getting them out. This is for private use only. NO COMMERCIAL USE, no EXCEPTION.
Compatible Cars
Originally published on thingiverse.com by Daniel Megard (MegardStudio) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
