Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Door Panels

2015+ Subaru WRX/STi Audiofrog Gb60 mount with OE AF grill

0 downloads552 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Adkins (Getmtuned)

Description

Made this to work with the Audiofrog Gb60 in the doors. Using the OEM mount is sloppy IMO. This uses the correct angle and makes a clean install that protects your Gb60 and ensures a proper seal. Use foam backing on the mount and where speaker rests. 1/4 works perfect. Change the OEM plastic clips for speaker mount indoor to a M6 rivnut *no drilling required with medium pressure they fit* Use either supplied rubber or hot glue to secure the grill and mount your speaker foam ring to the grill cover to ensure full seal to the door. YOU WILL NEED TO GRIND the bottom of the inside of door panel. OEM has a block with foam on it, this will hit the grill, or surround if you don't choose to run the grill. This is a molding design from panels that have premium sound tag on them from what I can tell. I tossed around ideas of this making it more rigid or to stop vibrating. I RTA tested it with and without "molded support". With no change. Simply following the contour and removing the hump they have you will have no issues and no visual or structural impact.