Center Console Latch - 2004/2005 Honda Civic/Accord - image

Files (1)

v4_CivicConsoleLatch.stl

STL

706.0 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

ABS / another high-temp filament

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
ABS filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Center Console

Center Console Latch - 2004/2005 Honda Civic/Accord

0 downloads6 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

ABS or another high-temp filament

Saved part guidance

Strength start

Higher infill for added strength, possibly 20-30% or more

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Higher-heat material; verify location and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement center/armrest console latch lock for a 2004 Honda Civic Replaces official part Honda 83408-S5A-010ZA Armrest Lock Hand-measured dimensions with calipers, may not be perfectly to spec. Added more material at joint (where OEM part broke) in order to avoid future breakage. This makes the latch a bit stiffer, however. Likely works on other year Civics and Accords up to 2005 with similar interior Printing Notes: Print in ABS (or other high-temp filament) ONLY. This will need to withstand the high temperatures of the car. If you only have PLA I'd recommend just purchasing the official part from Amazon for $10 Print part sideways (L shape against the bed) to maximize structural integrity in direction of required flex. Print Settings Filament: Generic ABS.