Files (2)

Dual_USB_Plate.stl

STL

113.2 KB

Dual_USB_Plate_Long_Ways.stl

STL

180.1 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Center Console

Honda Civic Dual USB Plate

0 downloads118 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA for durability in a car environment

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Dual USB Port Panel for Hondas I modified this switch plate so that you can have 2 USB's looking factory fresh in your 20 year old Honda. I wrapped the USB plugs in electrical tape to hold it into place, which also helps give extra strength to the clips so they don't snap as easily. Afterwards I used hot glue to really anchor the USBs down to the middle section. I'm putting this into an 03 Honda Civic but I'm sure it will work for a lot of different Hondas. The power converter linked is strong enough to power a raspberry pi in case you were thinking of using OpenAuto Pro. I also made a version where the USB's are turned 90 degrees in case your plates are orientated differently. The most important part is gluing the USB's into it so you cant push them into your car. 2 USB DC-DC Converter: https://www.amazon.com/gp/product/B07T2YFG9M/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 T- tap wire connectors: https://www.amazon.com/gp/product/B07114RK67/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1