Files (4)

StakePlugThickDriversSide.stl

STL

65.7 KB

StakePlugThickPassSide.stl

STL

67.2 KB

SteakPlugThinTopDriversSide.stl

STL

61.8 KB

SteakPlugThinTopPassSide.stl

STL

62.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

4 model files

Typical selected file

12g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.29

Filament only at roughly $24/kg PETG / ABS

Print time

20m–34m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 25%	100% solid	Recommendation
StakePlugThickDriversSide.stl	Printable file	65.7 KB STL	11g $0.26	12g $0.28	26g $0.62	Ensure proper cooling to prevent warping, especially with thin top models
StakePlugThickPassSide.stl	Printable file	67.2 KB STL	11g $0.26	12g $0.29	26g $0.63	Ensure proper cooling to prevent warping, especially with thin top models
SteakPlugThinTopDriversSide.stl	Printable file	61.8 KB STL	11g $0.26	12g $0.28	26g $0.61	Ensure proper cooling to prevent warping, especially with thin top models
SteakPlugThinTopPassSide.stl	Printable file	62.2 KB STL	11g $0.26	12g $0.28	26g $0.61	Ensure proper cooling to prevent warping, especially with thin top models

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tools & Jigs

Chevy Colorado Stake Hole Plugs

0 downloads8 views0 likes

Need this part printed?

Tell us what you need and we'll help you get it 3D printed. Takes a minute — no account needed and no payment is collected.

Request print / quote

Opens a quick request form. No order is placed and no payment is collected. Prefer email? Email us instead.

Shared by

Alfred

Verified

Description

I loved the base of this plug, but wanted to make the top part smaller and thinner. I made two different models, one with a ticket top piece with a beveled edge (I did not print this one) and one wit a very thin top, about 2mm. I also added PS (passenger side) and DS (Drivers side) to the underside to make printing/downloading a little easier. I printed it in ABS and used a raft to keep it from warping. Also, the top is pretty thin (on the thin slt) so make sure it's completely cool before removing. Thanks very much for the original design, it fits perfectly in my 2019 Colorado.

Compatible Cars

Chevrolet Colorado

Published Jul 3, 2026Updated Jul 3, 2026

Originally published on thingiverse.com by Jeff Avery (JeffAvery) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.