Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Knobs/Buttons

Gear Knob for Fiat-Abarth 124 Spider - Mazda MX-5 ND

2 downloads317 views0 quality score

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

(

Shared by

(Immaginaecrea)

Description

This gear knob is mountable on all cars that have the gearstick knob coupling with an M10X1.25 mm thread and the 6-speed configuration with reverse gear forward on the left. Printed with 0.06 mm layer height and polished with 1000 grit paper, water and oil in the finish. Inside are: No. 4 brass cylinders 12 mm diameter, 20 mm height No. 2 steel nuts M10X1.25 mm 2 M3X35 mm screws are used to fasten the 2 halves and the central rim The holes of the lower half must be M3 threaded after printing. The cover with the gear indication can be easily printed using the reverse printing method even with single-colour machines.