Files (2)
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Land Rover LR3 LR4 Discovery rear seat latch part, with Trim removal tool
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
A part to repair broken the latch for the rear seat on the Land Rover LR3/LR4/Discovery. You will need to reuse the old spring, and remove the trim to get the old latch out and press the new one in. The part was a copy from the broken latch but a pin feature is added to the part to help hold the spring in place for assembly. Its pretty self-explanatory, once the spring in on both ends force the part down into place. I made a small tool to help remove the trim in order to repair the latch because its really hard to get out with breaking the clips. Just mirror the part to to make the other side (the part is modeled as the RH side) The LR part number for the entire assembly is LR057394 or LR057393, but this is just the clip (everything else for me was OK). Printed in PETG with supports but PLA would work fine.
Compatible Vehicles
Originally published on thingiverse.com by James Schnaider (jrs824) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
