Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ASA filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Mazda 6 (2nd gen) cupholder divider
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ASA
Saved part guidance
Strength start
20-30% infill for durability and flexibility
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
This is a replacement divider for the cup holder in the center console of a 2nd generation (something like 2009 - 2013) Mazda 6. It is publicly available over at OnShape if you want to modify it in any way. I sliced off the bottom 0.3mm in Slic3r before I generated the gcode in order to clean up the channels on the sides. OnShape left an artifact right at the bottom when I did the subtraction to create those channels. It was my first time using it, so I couldn't figure out how to fix that. If you can't do that, just take a razor knife and cut it out of there once you print it. It's only going to be 1-2 layers.
Compatible Cars
Originally published on thingiverse.com by Dave Halderman (Dayve) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
First Gen Mazda 6 Cup Holder
Mazda 6 Phone cup holder
Mazda MX5 NA Miata Cup Holder Bigger 76mm ID
Yeti Cup Holder (for '21 Mazda CX-5)
Mazda 3 2003-2008 cup holder insert
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
