Files (1)
Published material guidance; still check heat, UV, load, and printer compatibility.
A planning starting point only; wall count, orientation, and geometry often matter more than infill.
Slice the selected model with your final material, orientation, walls, and supports.
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Reference shelf
Recommended filament for this print
Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.
| Referenced item | What to verify | Price & availability |
|---|---|---|
| PETG filamentAmazon · Affiliate link | Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region. | Check price at Amazon |
| ABS filamentAmazon · Affiliate link | Amazon product page for 1.75 mm ABS; use an enclosure and suitable ventilation, and verify temperature requirements and seller. | Check price at Amazon |
Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.
Unsure which one fits? Read the automotive filament guide.
Mazda CX5 sunroof switch replacement slider
Print this part
Use the part context as a starting point, then confirm geometry-dependent values in your slicer.
Files
1 hosted model file
STL
Material start
PETG or ABS
Saved part guidance
Strength start
20-30% infill for durability
Saved part guidance
Orientation / supports
verify in slicer
Exact totals
Slice for grams + time
Model geometry and final settings determine both
Vehicle exposure
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
The sunroof control switch for the Mazda CX5 connects to a slider that is known to break when the car gets old. This model is an effective replacement for that slider. Mazda only sells replacement for the entire roof console, so this model could save you over a hundred bucks. Ideally, print this in any filament that's more heat tolerant than PLA, such as ABS (which I think the original part is printed in) or PETG or even PC. For best results, print upside down, with supports only on the large flat surface and the short riser with a hole in it. The rest can be handled by bridges. See the included 3mf if unsure.
Compatible Cars
Originally published on printables.com by tabicat · License: Public Domain
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Mazda CX5 Center Cap 57mm - Blank
Mazda CX-5
2016 Mazda CX-5 Wireless Phone Charger + Android Auto
Mazda CX-5
Mazda Cx-5 Key Fob
Mazda CX-5
Universal head unit holder for Yaesu FT-857
Mazda CX-5
Mazda CX5 Phone Magnetic Mount platform
Mazda CX-5
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
