Files (2)

Seat_Vent_Knob_Final.stl

STL

1.1 MB

Seat_Vent_Knob_Tapered.stl

STL

650.3 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

2 model files

Material plan

PETG / ASA

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Choose the needed variant, then slice it for grams, cost, and print time.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Knobs/Buttons

Seat Ibiza 6L Vent Knob

0 downloads69 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

2 hosted model files

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 1.2-1.6 mm walls

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Car has gone:( This will be developed no further, edit, remix, do what you want to make it better. Regards P.S. Use the 'tapered.stl' file - the 'Final' wasn't! It's been left for you to fiddle with if required. _______________________________________________________________________ EDIT: 23/4/2018 - Changed the locating part to a tapered design (.stl says 'Tapered'), this SHOULD give a more snug fit - hold off on trying this until I have - printing it now. Stay tuned..... EDIT: 23/4/2018 - Yup, it fits FAR better, feels securely located and is now on the car. Download, print, install, enjoy! ________________________________________________________________________________ EDIT: 22/4/2018 - Just updated the stl, weirdly I already output the file from Fusion360 but made a slight error - the addition of the 'extra meat' around the 'outer retaining lugs' wasn't combined with the rest of the model. Basically it wasn't any different from the previous version!:( Also, this version has slightly shallower dimples on the front - they were breaking thru to the shell and you can see holes in the first photo. That's fixed now. Hopefully this version locates a bit more firmly, the last fitted but wasn't really hanging onto the vent enough, a good blast of hot air and it would've dropped off. It DOES say this is a work in progress....... ________________________________________________________________________________ Just for the heck of it I decided to design this. I was sat there, bored, waiting for my Wurth system to finish it's diagnostic and I started to fiddle! Right in front of me is a vent - I start to play, and then I decide to remove the knob on the front of it! Whilst it's sat there in my hand I thought 'This would be good practice to design this in Fusion360'........ so I did! I used PLA, I don't expect it to do so well in the heat but it's a bit of fun, white or red knobs look really striking against the rest of the interior. Enjoy!