Tesla 3 / Y Console Tray from 2021 models onwards / Konsole Ablagefach ab Modelljahr 2021 - image

Files (1)

Tesla Console Tray with Logo.stl

STL

55.9 KB

Print plan

Exact totals not supplied

Print setup plan

Useful setup guidance without pretending STL byte size can predict filament, cost, or print time.

1 model file

Material plan

PETG

Published material guidance; still check heat, UV, load, and printer compatibility.

Starting setup

25% infill

A planning starting point only; wall count, orientation, and geometry often matter more than infill.

Final totals

Confirm in slicer

Slice the selected model with your final material, orientation, walls, and supports.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Tesla 3 / Y Console Tray from 2021 models onwards / Konsole Ablagefach ab Modelljahr 2021

0 downloads3 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

1 hosted model file

STL

Material start

PETG

Saved part guidance

Strength start

20-30% infill for durability, with 2-3 walls for strength

Saved part guidance

Orientation / supports

supports unlikely

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

It's a remix of 'zrides' "Tesla Model 3 Center Console Tray -- 2021 I have made my remix a bit longer so that sunglasses fits inside, as well as a wallet next to it. The tray can still be easily pushed back, allowing access to the lower storage area. Furthermore, I have designed two different models: one with a logo and one without a logo. Those who wish to print everything in carbon fiber style like me will need the model without the logo. The TPU inserts can be printed individually and fit both models. For the model with a carbon-fiber surface, you can print the logo, frame, and TPU inserts individually on a structured build plate with the correct alignment already set. This allows for convenient printing and assembly. I printed all the parts in PETG, except for the TPU inserts, which are, of course, made of TPU material. The best part is that no support is required for the printing process. ______________________________________________________________________________________________________________ Ich habe meinen Remix etwas verlängert, damit eine Sonnenbrille längs hineinpasst, sowie ein Portemonnaie daneben. Das Tray kann immer noch problemlos nach hinten geschoben werden, um Zugang zum unteren Stauraum zu ermöglichen. Außerdem habe ich zwei verschiedene Modelle entworfen: eins mit Logo und eins ohne Logo. Wer alles in Carbon-Optik drucken möchte wie ich, benötigt das Modell ohne Logo. Die TPU-Einsätze können einzeln gedruckt werden und passen in beide Modelle. Für das Modell mit Carbon-Oberfläche können das Logo, der Rahmen und die TPU-Einsätze einzeln auf einer strukturierten Bauplatte mit bereits korrekter Ausrichtung gedruckt werden. Das ermöglicht einen bequemen Druck und Zusammenbau. Alle Teile habe ich aus PETG gedruckt, außer den TPU-Einsätzen, die natürlich aus TPU-Material sind. Das Beste ist, dass kein Support für den Druck benötigt wird.