Toyota Tacoma Antenna Mount/bezel

0 downloads73 views0 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

Source link only

No hosted model files

Material start

PETG or ASA for durability in outdoor conditions

Saved part guidance

Strength start

20-30% infill for a balance between strength and weight

Saved part guidance

Orientation / supports

verify in slicer

Exact totals

Slice for grams + time

Model geometry and final settings determine both

Vehicle exposure

UV/weather exposure — ASA is the starting point

Download the model at its source, then confirm the format is supported by your slicer. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

Download at source

License & use

CC BY-NC

Link-only

Attribution required

Files stay with the original publisher; this catalog entry does not grant hosting or resale rights. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

My 2006 Toyota Tacoma's antenna bezel/mount was corroded under the rubber cover. I took a laser scan of the bezel just to 3D print a plastic one so the corrosion stops dripping onto the paint when it rains. The model is not perfect, as the scan didn't get into the crevices, but when I 3D printed it, I just took a drill bit and drilled out the hole to get rid of the imperfections. Also, be advised, the model does include the divots from the corrosion, because I scanned the corroded bezel, the model has those imperfections in it, but because the rubber casing goes over the bezel, I did not mind the divots.