Files (23)

GRILL.stl

STL

2.5 MB

HOOD.stl

STL

2.9 MB

HOOD_NO_SCOOP.stl

STL

28.5 MB

SCOOP.stl

STL

726.7 KB

DRIVING_LIGHT_PANEL.stl

STL

415.1 KB

HEADLIGHT_R.stl

STL

956.8 KB

HEADLIGHT_L.stl

STL

949.8 KB

BODY_1.stl

STL

7.3 MB

BODY_3.stl

STL

6.0 MB

DOOR_LF.stl

STL

2.4 MB

DOOR_RF.stl

STL

1.7 MB

DOOR_LR.stl

STL

1.9 MB

DOOR_RR.stl

STL

1.7 MB

DOOR_HANDLE_.stl

STL

1.8 MB

MIRROR_R.stl

STL

4.0 MB

TOP.stl

STL

2.2 MB

BED_1.stl

STL

3.6 MB

BED_2.stl

STL

2.2 MB

BED_LINER.stl

STL

3.7 MB

TAIL_LIGHT_R.stl

STL

851.3 KB

TAIL_LIGHT_L.stl

STL

772.6 KB

TAILGATE_.stl

STL

2.8 MB

BUMPER_REAR.stl

STL

300.4 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Saved filament data plus editable planning inputs for cost and time.

23 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Reference shelf

Recommended filament for this print

Product references matched to the published material guidance. Confirm diameter, heat resistance, colour, and printer compatibility.

Referenced item	What to verify	Price & availability
PETG filamentAmazon · Affiliate link	Amazon product page for 1.75 mm PETG; confirm colour, spool size, print temperature, seller, and delivery region.	Check price at Amazon
ASA filamentAmazon · Affiliate link	Amazon product page for 1.75 mm ASA; use an enclosure and suitable ventilation, and confirm seller and regional availability.	Check price at Amazon

Affiliate disclosure: if you buy through an eligible link, 3DPrintedCarPart may earn a commission at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Confirm product specifications, compatibility, seller terms, and vehicle safety before ordering or using anything. Amazon may redirect you to a nearby supported store; otherwise the original Amazon.com page remains available.

Unsure which one fits? Read the automotive filament guide.

Exterior

Toyota Tacoma/Taco V1

36 downloads4.5K views2 quality score

Print this part

Use the part context as a starting point, then confirm geometry-dependent values in your slicer.

Files

23 hosted model files

STL

Material start

PETG or ASA

Saved part guidance

Strength start

20-30% infill with 2-3 walls for durability

Saved part guidance

Orientation / supports

Likely not needed

Exact totals

50 g · 2 hours

Saved estimate

Vehicle exposure

UV/weather exposure — ASA is the starting point

Open the STL, 3MF, or OBJ model in your slicer before printing. Exact grams, time, and final support placement come from the actual slice. Test-fit and heat-check the part before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

Michael Chen

Verified

Description

NOTE: Check out Toyota Taco V2. It is this same model but the vertical dimension is fully scale and it has been cut up to print more easily with less support. Inspired by 2017 Toyota Tacoma. Details: 313mm wheelbase. 223mm wide. 493mm long. (not including the rear bumper) No posts on the rear bumper yet. I figured we can all have fun figuring that out. Some supports are only in there to make is easier to print and glue up. They will need to be cut out.